Maintenance And Troubleshooting - Burkert 1062 Manuel Utilisateur

Maintenanceandtroubleshooting
10. mAinTenAnce And
TRoubleshooTinG
10.1. safety instructions
dangEr
danger due to high pressure in the installation.
• Shut down the pneumatic power source and depressurise the
pipes before carrying out work on the device.
Risk of injury due to electrical discharge.
• Before starting work, switch off the power supply and secure it
from restarting.
• Observe all applicable accident protection and safety regula-
tions for electrical equipment.
Warning
Risk of injury due to non-conforming maintenance.
• Maintenance must only be carried out by qualified and skilled
staff with the appropriate tools.
• Guarantee a set or controlled restarting of the process, after a
power supply interruption.
10.2. cleaning of the transmitter
The external surface of the electrical position feedback can be
cleaned with a cloth dampened with water or a product compatible
with the materials from which it is made.
All manuals and user guides at all-guides.com
Type 1062
Please feel free to contact your Bürkert supplier for any additional
information.
English
35