Commissioning; Safety Instructions; Maintenance And Troubleshooting - Burkert 8071 Manuel Utilisateur

Commissioning

8. commissioninG
8.1.

safety instructions

warning
danger due to non-conforming commissioning.
Non conforming commissioning may lead to injuries and damage
the device and its surroundings.
• Before commissioning, make sure that the staff in charge have
read and fully understood the contents of the manual.
• In particular, observe the safety recommendations and intended
use.
• The device/ the installation must only be commissioned by suit-
ably trained staff.
Protect this device against electromagnetic interference,
ultraviolet rays and, when installed outdoors, the effects of
the climatic conditions.
The pipe must be full of liquid whitout air bubbles.
→
Drain air from the pipe by gradually filling the pipe with fluid.
→
Make sure the installation is tight.
Type 8071
9. mAinTenAnce And
TRoubleshooTinG
9.1.

safety instructions

danger
Risk of injury due to high pressure in the installation.
• Stop the circulation of fluid and release the pressure before
loosening the process connections.
Risk of injury due to electrical discharge.
• Before starting work, switch off the power supply and secure it
to prevent restarting.
• Observe all applicable accident protection and safety guidelines
for electrical equipment.
Risk of injury due to the nature of the fluid.
• Respect the prevailing regulations on accident prevention and
safety relating to the use of aggressive fluids.
Risk of injury due to high fluid temperatures.
• Use safety gloves to handle the device.
• Stop the circulation of fluid and bleed the pipe before loosening
the process connections.
• Keep all easily flammable material away from the device.
english
15