Electrical Wiring; Wiring The Npn Transistor Ouptut; Wiring The Reed Switch Output - Burkert 8071 Manuel Utilisateur

Installationandwiring
7.3.

electrical wiring

danger
Risk of injury due to electrical discharge.
• Before starting work, switch off the power supply and secure it
to prevent restarting.
• Observe all applicable accident protection and safety guidelines
for electrical equipment.
• Use a high quality electrical power supply (filtered and
regulated).
• Make sure the installation is equipotential.
details of the electrical wiring of the 8071 sensor
Red wire
black wire
White wire
yellow wire
Green wire
Type 8071
Sensor power supply (+)
Sensor power supply (-)
Frequency output
Reed switch
Reed switch
7.3.1.

Wiring the npn transistor ouptut

L+ (4,5 - 24 VDC) (red)
L- (black)
Frequency output-
NPN (white)
R=1.8 kW pull-up at 24 VDC
Fig.4 Wiring of the NPN transistor output
7.3.2.

Wiring the Reed switch output

max. 30 VDC (yellow)
max. 0,5 A (green)
Fig.5 Wiring of the Reed switch output
english
X
VDC
R
13