Technical Specifications Of Product Components - Nice MhouseKit WU200S Instructions Et Avertissements Pour L'installation Et L'utilisation

TECHNICAL SPECIFICATIONS OF PRODUCT COMPONENTS

WU200S is manufactured by NICE S.p.a. (TV) I. Nice S.p.a., in order to improve its products, reserves the right to modify their technical characteristics
at any time without prior notice. In any case, the manufacturer guarantees their functionality and fitness for the intended purposes. Note: all the
technical characteristics refer to a temperature of 20°C.
Model:
Type
Technology adopted
Peak torque
Nominal torque
Speed (no load)
Nominal torque speed
Maximum cycles frequency
Maximum continuous cycle time
Operating limits
Power input
Nominal absorbed current
Ambient operating temperature
Use in acid, saline or potentially
explosive atmospheres
Mounting
Protection rating
Dimensions / weight
PH100 photocells (optional)
Type
Technology adopted
Detection capacity
TX transmission angle
RX reception angle
Useful range
Power supply/output
Absorbed power
Maximum cable length
Addressing capability
Ambient operating temperature
Use in acid, saline or potentially
explosive atmospheres
Mounting
Protection rating
Dimensions / weight
WU100SK straight arm gearmotor for hinged gates
Electromechanical gearmotor for automation of automatic gates and doors
24Vdc motor, reducer with helical gears; mechanical release
250 Nm
120Nm
1.25 RPM
1 RPM
60 cycles/hour
10 minutes
The structural features make it suitable for use on gates with a weight of up to 400kg or a leaf
length of up to 2.3m and an opening angle of up to 180°
24Vdc
2A, at peak power the maximum current is 5 A for a maximum duration of 2 s
-20 ÷ 50°C (at low temperatures the gearmotor efficiency decreases)
No
Interred in a suitable foundation excavation
IP67
230x206xh88mm / 15Kg (gearmotor with foundation case)
Presence detector for automation of automatic gates and doors (type D in accordance with EN
12453) made up of a pair of a transmitter "TX" and a receiver "RX"
Optical, via direct TX-RX interpolation with modulated infrared beam
Opaque objects placed on the optical axis between TX-RX with dimensions greater than 50mm
and a speed of below 1.6 m/s
approx. 20°
approx. 20°
Up to 10m for maximum ± 5° TX-RX offset (the device can signal an obstacle even in the event of
particularly adverse weather conditions)
The device can be connected only to "ECSBus" networks, from which it obtains electrical power
and sends the output signals
1 ECSBus unit
Up to 20 m (observe the warnings regarding minimum gauge and type of cables)
Up to 6 detectors with security features and 2 to control the open command
Automatic synchronisation avoids interference between the various detectors
-20 ÷ 50°C
No
Vertical, wall-mounted
IP44
64 x 89.2 h 29 mm / 60 g
English – 29