Nice MhouseKit WU200S Instructions Et Avertissements Pour L'installation Et L'utilisation page 70

Declaration in accordance with the following Directives: 1999/5/EC (R&TTE), 2004/108/EC (EMC); 2006/42/EC (MD)
WU100SK, CL200S, GTX4, PH100 and FL100 are products by NICE S.p.a. (prov. of Treviso – Italy)
Note - The content of this declaration corresponds to that specified in the official document deposited at the Nice S.p.A. head-
quarters and, in particular, to the latest revised edition available prior to the publishing of this manual. The text herein has been
re-edited for editorial purposes. A copy of the original declaration can be requested from Nice S.p.A. (prov. of Treviso – Italy)
Number: 479/WU200S
Manufacturer's Name:
Address:
Person authorized to compile
the technical documentation:
Product type:
Model / Type:
Accessories:
The undersigned Luigi Paro, as Managing Director, hereby declares under his own responsibility that the products identified
above comply with the provisions of the following directives:
• The models CL200S and GTX4 conform to Directive 1999/5/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their con-
formity, in accordance with the following harmonised standards:
- Health and safety (Art. 3(1)(a)): EN 50371:2002
- Electrical safety (Art. 3(1)(a)): EN 60950-1:2006 + A11:2009
- Electromagnetic compatibility (Art. 3(1)(b)): EN 301 489-1 V1.8.1:2008, EN 301 489-3 V1.4.1:2002
- Radio spectrum (Art. 3(3)): EN 300 220-2 V2.3.1:2010
In accordance with Directive 1999/5/EC (appendix V), the GTX4 product is class 1 and marked:
• Models WU100SK, CL200S, PH100 and FL100 conform to DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT
AND COUNCIL of December 15 2004 concerning alignment of Member States' legislation regarding electromagnetic com-
patibility and abrogating directive 89/336/EEC, according to the following harmonized standards:
EN 61000-6-2:2005, EN 61000-6-3:2007
In addition, the WU100SK e CL200S products conform to the following directive in accordance with the provisions applicable
to partly completed machinery:
Directive 2006/42/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of May 17 2006 regarding machines and amending
directive 95/16/EC (consolidated text)
•
I hereby declare that the pertinent technical documentation has been drafted in accordance with Annex VII B of Directive 2006/42/EC and
that the following essential requirements have been fulfilled:
1.1- 1.1.2- 1.1.3- 1.2.1-1.2.6- 1.5.1-1.5.2- 1.5.5- 1.5.6- 1.5.7- 1.5.8- 1.5.10- 1.5.11
•
The manufacturer agrees to send the national authorities pertinent information on the partly completed machinery, in response to a motivated
request, without affecting its intellectual property rights.
•
If the partly completed machinery is operated in a European country with an official language other than the language used in this declaration,
the importer must include a translation with this declaration.
•
The partly completed machinery must not be operated until the final machine in which it is to be incorporated is declared to conform to the
provisions of Directive 2006/42/EC, if applicable.
The WU100SK and CL200S products also comply with the following standards:
EN 60335-1:2002 + A1:2004 + A11:2004 + A12:2006 + A2:2006 + A13:2008 + A14:2010 + A15:2011
EN 60335-2-103:2003
The parts of the WU100SK and CL200S products which are subject to the following standards comply with them:
EN 13241-1:2003, EN 12445:2002, EN 12453:2002, EN 12978:2003 + A1:2009
Oderzo, 31 July 2013
32 – English
ANNEX 2 ANNEX 1
EC Declaration of Conformity
annex II, part B
Revision: 0
NICE s.p.a.
Via Pezza Alta 13, Z.I. Rustignè, 31046 Oderzo (TV) Italy
NICE S.p.A.
Electromechanical gearmotor and accessory equipment
WU100SK, CL200S, GTX4, PH100, FL100
Language: EN
0682
Mr. Luigi Paro (Managing Director)