Troubleshooting - Klarstein METROBREEZE 9 PARIS Mode D'emploi

EN
34

TROUBLESHOOTING

Problems Reasons
The air There is no electricity.
conditioning does
not work.
The overflow indicator
displays „FL".
The ambient temperature is
too low or too high.
In cooling mode, the room
temperature is lower than
the set temperature.
In dehumidification mode,
the ambient temperature
is low.
The cooling effect There is direct sunlight.
is not good.
Doors or windows are open;
there are a lot of people; or
in cooling mode, there are
other sources of heat.
The filter screen is dirty.
The air inlet or outlet is
blocked.
Big Noise The air conditioning is not
placed on a flat surface.
The compressor Overheat protection starts.
does not work.
Solutions
Turn it on after connecting
it to a socket with
electricity.
Discharge the water inside.
Recommend to use
temperature of 7-35 ℃
the machine in at the
(44-95 ℉).
Change the set
temperature.
The machine is placed in
a room with an ambient
than 17 ℃ (62 ℉).
temperature of greater
Pull the curtains.
Close doors and
windows, and add new air
conditioning.
Clean or replace the filter
screen.
Clear obstructions.
Put the air conditioning on
a flat and hard place (to
reduce noise).
Wait for 3 minutes until the
temperature is lowered,
and then restart the
machine.