Scope Of Supply; Basic Device; Switch Box; Heat Pump Manager - Dimplex LA 6S-TUR Instructions D'installation Et D'utilisation

English
3

Scope of supply

3.1 Basic device

The heat pump is of compact design and the scope of supply
includes the components listed.
The refrigeration circuit is "hermetically sealed" and contains
the fluorinated refrigerant R410A included in the Kyoto proto-
col. Information on the GWP value and CO
refrigerant can be found in the chapter Device information. The
refrigerant is CFC-free, non-ozone depleting and non-combus-
tible
1) Evaporator
2) Ventilator
3) Expansion valve
4) Filter dryer
5) Liquefier
6) Compressors
7)

Switch box

EN-4
3.2 Switch box
The switch box is located in the heat pump. After the two
screws shown have been loosened, the cover can be removed.
.
equivalent of the
2
The switch box contains the control elements for the compres-
sor, fan and the controller for the electronic expansion valve.
The supply connections (protected with a cover) are located on
the bottom of the switch box.

3.3 Heat pump manager

Use the heat pump manager included in the scope of supply to
operate the air-to-water heat pump.
The heat pump manager is a convenient electronic regulation
and control device. It controls and monitors the entire heating
system based on the external temperature, as well as domestic
hot water preparation and safety systems.
The customer must install the external temperature sensor,
which is included in the scope of supply of the unit heat pump
and heat pump manager together with the necessary fixing ac-
cessories.
The enclosed operating instructions describe the function and
use of the heat pump manager.
452163.66.95 · FD 0107
Cover supply
connection terminals
LA 6S-TUR
www.glendimplex.de