entrematic Ditec ION4 Manuel Technique page 78

15.2 Second level menu - AT (Automatic Configurations)
Display
DM - Direction mode
RT-opens to the right
LF-open to the left
H0 - Predefined setting, residential use 0
This selection loads predefined values for certain standard parameters:
AC - enabling of automatic closing
C5 - step-by-step/opening command operation
RM - remote control operation
AM - AUX plug-in board operation
SS - Selection of automation status at start-up
H1 - Predefined setting, residential use 1
This selection loads predefined values for certain standard parameters:
AC - enabling of automatic closing
TC - setting of automatic closing time
C5 - step-by-step/opening command operation
RM - remote control operation
AM - AUX plug-in board operation
SS - Selection of automation status at start-up
C0 - Predefined setting, condominium use 0
This selection loads predefined values for certain standard parameters:
AC - Enabling of automatic closure
TC - setting of automatic closing time
C5 - step-by-step/opening command operation
RM - remote control operation
AM - AUX plug-in board operation
SS - Selection of automation status at start-up
RD - Resetting of general settings (SETTINGS RESET)
AA - Activation of additional configurable parameters for each func-
tion of the main menu.
After activation you can scroll through the third level menus.
The third level menus are activated for 30 min.
EN
Description
→ →
2"
→
2"
→
2"
24
Selections
available
: 1-2
: Step-by-step
: Step-by-step
: Step-by-step
: open
: enabled
: 1 minute
: Step-by-step
: Step-by-step
: Step-by-step
: closed
: enabled
: 1 minute
: Opening
: Opening
: Opening
: closed