entrematic Ditec ION4 Manuel Technique page 77

15. Adjustments
i
NB: depending on the type of automation and control panel, some menus may not be
available.
15.1 Main menu
Display
WZ - Wizard
Quick configuration menu
AT - Automatic Configurations.
The menu allows you to manage the automatic configurations of the control panel.
BC - Basic Configurations.
The menu allows you to display and modify the main settings of the control panel.
BA - Basic Adjustments.
The menu allows you to display and modify the main adjustments of the control panel.
NB: some settings require at least three operations before they are set correctly.
RO - Radio Operations.
The menu is used to manage the radio functions of the control panel (alarm management,
diagnostics enabling, FW updating).
SF - Special Functions.
The menu allows you to set the password and manage the special functions in the control
panel.
CC - Cycles Counter.
The menu allows you to display the number of operations carried out by the automation and
manage the maintenance interventions.
EM - Energy Management.
The menu allows you to display and modify the energy saving settings and adjustments
(Green Mode and battery management).
AP - Advanced Parameters.
The menu allows you to display and modify the advanced settings and adjustments of the
control panel (limit switch mode, selection of devices connected to the terminals, disengage-
ment duration adjustments, flashing light adjustments, etc.).
NB: some settings require at least three operations before they are set correctly.
From the main menu you can access the second level menu as follows:
• use the
• press to confirm
After confirming the selection, you access the second level menu.
For each function of the main menu, there are also additional configurations that
can be viewed by enabling the
NB: to check if the parameters have actually been modified, quit the relative param-
i
eter and then access it again.
The modifications will take effect from the next operation.
and keys to select the required function
function (see the following paragraph).
Description
23
EN