Before Use - cecotec CONGA 1090 Manuel D'instructions

ENGLISH
Press it to start cleaning too.
Fig. 2
1. Anti-collision sensors
Fig. 3
1. Free-fall sensors
2. Driving wheels
3. Power switch
4. Charging terminals
5. Omnidirectional wheel
6. Side brushes
7. Battery
8. Dust tank
9. Main brush
Fig. 4
Charging base
Fig. 5
Power adapter
Fig. 6
Remote control (Not included with Conga 1090 Connected)
Fig. 7
Dust tank (Not included with Conga 1090 Connected Force)
Fig. 8
Wet and dry tank
Fig. 9
Primary filter and high-efficiency filter
Fig. 10
Brush
Fig. 11
Side brushes
Fig. 12
30
Silicone main brush
Fig. 13
2 mops
Fig. 14
Main bristles brush
Fig. 15
Magnetic strips (only included with Conga 1099 Connected)
Note: Conga 1090 Connected Force includes Velcro spare parts.
Fig. 16
1. Charging indicator
2. Remote control holder
3. Signal transmitter
4. Charging terminals
Fig. 17
1. Mode and time display
2. Clock settings
3. Automatic charge/back home
4. Auto cleaning/pause
5. Direction buttons
6. Spot cleaning
7. Room cleaning
8. Scrubbing levels
9. Schedule
10. Edge cleaning
11. Power levels

3. BEFORE USE

Take the product out of the box.
Remove all packaging materials. Keep the original box.
Make sure all the components are included and in good conditions, otherwise, contact
immediately the official Technical Support Service of Cecotec.
Warning: Remove all objects around the robot such as clothing, papers, cables, curtains or
other fragile objects.
CONGA 1090 CONNECTED/ 1090 CONNECTED FORCE/ 1099 CONNECTED
ENGLISH
31