Technical Specifications; Disposal Of Old Electrical Appliances; Technical Support Service And Warranty - cecotec CONGA 1090 Manuel D'instructions

ENGLISH
Red light on. 4 beeps. The robot cannot return
to its charging base or
starting position.

7. TECHNICAL SPECIFICATIONS

Product: Conga 1090 Connected/ Conga 1090 Connected Force/ Conga 1099 Connected
Product reference: 05410/ 05413/ 05411
Voltage: 100-240 V ~, 50/60 Hz
Battery: 14.4 V, 2600 mAh
Frequency Band: 2.4 GHz
Maximum Transmission Power: 17.5 dBm
Made in China | Designed in Spain

8. DISPOSAL OF OLD ELECTRICAL APPLIANCES

The European directive 2012/19/EU on Waste Electrical and Electronic
Equipment (WEEE), specifies that old household electrical appliances must
not be disposed of with the normal unsorted municipal waste. Old appliances
must be collected separately, in order to optimize the recovery and recycling
of the materials they contain and reduce the impact on human health and
the environment.
The crossed out "wheeled bin" symbol on the product reminds you of your
obligation to dispose of the appliance correctly. If the product has a built-in battery or uses
batteries, they should be removed from the appliance and disposed of appropriately.
Consumers must contact their local authorities or retailer for information concerning the
correct disposal of old appliances and/or their batteries.

9. TECHNICAL SUPPORT SERVICE AND WARRANTY

This product is under warranty for 2 years from the date of purchase, as long as the proof
of purchase is submitted, the product is in perfect physical condition, and it has been given
proper use, as explained in this instruction manual.
The warranty will not cover the following situations:
40
Make sure there are no
obstacles in front of the
charging base. Clean the
charging terminals on both the
charging base and the robot
with a clean, soft and dry cloth.
The product has been used for purposes other than those intended for it, misused, beaten,
exposed to moisture, immersed in liquid or corrosive substances, as well as any other fault
attributable to the customer.
The product has been disassembled, modified, or repaired by persons, not authorised by the
official Technical Support Service of Cecotec.
Faults deriving from the normal wear and tear of its parts, due to use.
The warranty service covers every manufacturing defects of your appliance for 2 years, based
on current legislation, except consumable parts. In the event of misuse, the warranty will not
apply.
If at any moment you detect any problem with your product or have any doubt, do not hesitate
to contact Cecotec Technical Support Service at +34 963 210 728.
CONGA 1090 CONNECTED/ 1090 CONNECTED FORCE/ 1099 CONNECTED
ENGLISH
41