Barazza 1MCBFN Guide D'utilisation page 62

EN 2/ USING YOUR APPLIANCE
•MICROWAVE PLUS HEAT CIRCULATION FUNCTION
The cooking by microwave and heat circulation function saves you a lot of time. The cooking
temperature can be adjusted in increments of 10°C, from 50°C to 250°C and you set the
cooking time.
Programming the MW + HEAT CIRCULATION function
Select the MW + HEAT CIRCULATION function
The corresponding display lights up.
Press the °C button; 200°C flashes in the display.
Adjust the programme temperature using the + and - buttons, e.g.
210°C.
Confirm by pressing
Press to set the cooking time.
The cooking time digits start flashing in the display.
Press the + and - buttons, e.g. 40 minutes.
Confirm by pressing
The oven switches on and the programme begins.
For cooking with a delayed start:
After setting the cooking time, confirm by pressing
press twice and then use + and - to set the desired
end of cooking time, e.g. 13:50 hrs.
Confirm by pressing
The oven will switch on at the required time.
:
Note
The cooking time may be adjusted at any time simply by pressing
tons.
A beep sounds to indicate that the programmed temperature has been reached and the "°C"
symbol stops flashing.
:
Warning
Never preheat your oven in the Heat Circulation plus Microwave mode, as this could
damage the appliance.
When using the oven in the combined heat circulation + micro-wave mode, do not use
metal cookware.
Cooking on two levels:
To simultaneously cook an 800 g veal roast and 800 g of potatoes au gratin, set the appliance
as follows: 55 minutes at 170°C.
We recommend that you place the potatoes on the turntable and the veal roast on the drip tray
positioned on level 3.
All manuals and user guides at all-guides.com
.
.
.
, then
28
Display
and the + and - but-