Barazza 1MCBFN Guide D'utilisation page 41

All manuals and user guides at all-guides.com
EN
2/ INSTALLING YOUR APPLIANCE
•RECESS FITTING
The appliance can be installed under a worktop or in a wall unit (open or closed) with the appro-
priate dimensions for recessed installation (Fig.1 ).
Do not use your appliance immediately (wait approximately 1 to 2 hours) after moving it from a
cold location to a hot location, as the condensation may cause a malfunction.
Centre the oven in the unit so as to ensure a minimum distance of 10 mm between the applian-
ce and the surrounding unit. The material of the unit supporting the appliance must be heat
resistant (or covered with a heat-resistant material). For greater stability, attach the oven to the
unit with 2 screws through the holes provided on the side panels.
Fig. 1
7