Barazza 1MCBFN Guide D'utilisation page 56

EN 2/ USING YOUR APPLIANCE
•THE DEFROST FUNCTION
Select the defrost programme that corresponds to the type and quantity of food that you
wish to defrost and the "automatic" function will programme the required defrosting time.
Automatic defrosting
Select the DEFROST function.
The corresponding display lights up and shows "d1".
Confirm by pressing
Press the + and - buttons to select d2, d3 or d4, e.g. d2. Confirm
by pressing .
For the d1 defrosting programme, the length of time flashes in
the display.
For the d2, d2 and d3 defrosting programmes, "100 g" (minimum
defrost weight) appears in the display.
Press the + and - buttons to select the time (d1) or the weight
(d2, d3 and d4), e.g. 700 g.
Confirm by pressing
The required time is calculated automatically. The programme
duration appears in the display and the defrost programme
starts.
:
Note
The defrost time is automatically calculated based on the weight of the food. It may vary, depending
on the initial temperature of the food (times are based on frozen food at -18°C).
For food weighing more than 350 g (except bread), a beep sounds mid way through the automatic
defrosting programme, to remind you that it is time to turn the food over, to obtain the best results
and "turn" is shown in the display. After turning the food over, close the door and press the button
to continue the defrost programme.
With the automatic defrost function, the defrost time cannot be modified.
For foods that do not appear in the food category recommendations, use the 200W MICROWAVE
function or d1. Refer to the notes below for the recommended programme times.
All manuals and user guides at all-guides.com
.
.
22
Display