Removing The Battery; Recharging The Battery - Italjet DiablOne Manuel De Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

REMOVING THE BATTERY

Insert the key, push and successi-
vely turn the key in an anticlockwi-
se direction to the OPEN position.
Remove the battery by raising it
upwards, letting it slide along the
binary plate welded to the frame.
To facilitate the removal of the battery,
utilise the appropriate handle (F).
All manuals and user guides at all-guides.com

RECHARGING THE BATTERY

The battery can be recharged either in
its housing or away from the vehicle.
L
F
Switch off the dashboard using the
key (OFF).
Connect the plug (H) of the battery
charger to the socket connector of
the battery (I).
Connect the plug of the battery
charger (L) to a 100-240 V, 50Hz
electricity power supply.
65
The LED (light-emitting diode) positio-
ned on the battery charger will keep you
constantly informed about the operatio-
nal status.
Charging cycle and LED indicators
LED
Description
Red
Battery
(always remains alight and
red)
Red/Green
Red when the battery is on
I
charge, green when charging
has ¿ nished.
ATTENTION:
Before charging the battery check:
That the power supply cable is cor-
H
rectly connected.
That the contacts of the battery
charger and the batteries are clean
and not damaged or bent.
That the battery is not broken or
damaged.
That the plug of the battery charger
is properly inserted into the socket
of the battery.
If it is not possible to charge the battery:
Check that there is voltage at the
socket. If necessary connect to
UK
charger
active

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Angel

Table des Matières