Mechanical Attachment To The Height Adjustment - Festo 8125328 Notice D'utilisation

Electric gripper – Operating instructions

7.2 Mechanical attachment to the height adjustment

The gripper is attached to the height adjustment of Robotino.
Proceed as follows when doing this:
1. Carefully position the height adjustment on the Robotino mounting column.
2. Set the desired height and fasten the height adjustment.
3. Position the gripper assembly on the adapter plate and tighten the screws.
Use the oblong holes provided for this purpose on the grab frame.
4. Pull the connector cable sideways past the gripper.
5. Connect the plugs to the respective sockets of the interface box.
18
No. Designation
1 M5 Cheese head screw with washer
2 Adapter plate
3 Cable socket
4 Height adjustment
5 Mounting column
6 Gripper module
© Festo Didactic 8125214