EIBENSTOCK EDS 181 Notice Originale page 16

Technical Data
Wet-Dry Diamond Saw
Rated voltage:
Power input:
Rated current
Order Number:
Frequency:
No-load speed:
Rated speed:
Max. disc diameter:
Spindle connection:
Cutting depth max.:
Protection class:
Degree of protection:
Net weight:
Interference suppression:
Available accessories:
Diamond cutting 180 mm
Diamond cutting 200 mm
Guide rail 750 mm
Guide rail 1500 mm
Connecting strip for guide rail
Set of 2 suction holder for guide rail
Industrial Vacuum Cleaner DSS 25 A
Industrial Vacuum Cleaner DSS 35 M iP
Content of Delivery
EDS 181 with diamond cutting disc Ø 180mm, tool kit and operating
instructions in a metal case.
Application for Indented Purpose
The Wet-Dry Diamond Saw is intended for professional use and may only be
operated after being fully installed in accordance with the installation
instructions. With the appropriate diamond cutting disc, the EDS 181 can be
used to cut natural stone such as granite, marble, concrete items such as
flagstones, lawn borders and terrazzo as well as for joint renovation. During
wet cutting, the diamond cutting disc must be cooled with water from the
available water supply. During dry cutting, vacuum removal of the dust is
absolutely essential.
Only diamond cutting discs recommended by the manufacturer should
be used.
EDS 181
50 - 60 Hz
7500 rpm
4300 rpm
200 mm
Ø 22.2 mm
63 mm
(with cutting disc Ø200mm
and without guide rails)
II
IP 20
ca. 7.7 kg
EN 55014 und EN 61000
16
230 V ~ 110 V ~
2300 W
20 A
0660P 0660Q
Ordernumber:
37463
37444
37461
37462
37463
37464
09915
09919