ADEUNIS WMBUS Pulse Guide Utilisateur page 76

WMBUS Pulse - Guide utilisateur / User guide version V2.2.0
S323 Current value of meter -
channel A
S324 Current value of meter -
FR
channel B
S325 Flow calculation period (chan-
nels A and B)
EN
S326 Flow threshold (channel A)
S327 Flow threshold (channel B)
S328 Leak threshold (channel A)
S329 Leak threshold (channel B)
S330 Number of daily periods under
the leak threshold (channel A)
S331 Number of daily periods under
the leak threshold (channel B)
S332 Scan period for Channel A
tamper input
S333 Tamper detection threshold
channel A
S334 Scan period for Channel B
tamper input
S335 Tamper detection threshold
channel B
Decimal Default value: 0
Min/max : 0 to (2
Unit : number of pulses
In COMMAND mode, it is possible to write a new value in this register (for
example an initialization value, an adjustment value ...).
Decimal Default value: 0
Min/max : 0 to (2
Unit : number of pulses
In COMMAND mode, it is possible to write a new value in this register (for
example an initialization value, an adjustment value ...).
Decimal Default value: 60
Min/max : 1 to 1440
Unit :
x 1min if S306=1
x 20s if S306=2
Decimal Default value :0 (deactivated)
Min/max : 0 to 65535
Unit: pulses per hour
Decimal Default value :0 (deactivated)
Min/max : 0 to 65535
Unit: pulses per hour
Decimal Default value: 0
Min/max : 0 to 65535
Unit : pulses per hour
Decimal Default value: 0
Min/max : 0 to 65535
Unit : pulses per hour
Decimal Default value: 0 (deactivated)
Min/max : 0 to 1440
Unit : none
The multiplication of this register by the period of flow measurement must
be less than 24 hours otherwise the product will be perpetually in alarm.
Decimal Default value: 0 (deactivated)
Min/max : 0 to 1440
Unit : none
The multiplication of this register by the period of flow measurement must
be less than 24 hours otherwise the product will be perpetually in alarm.
Decimal Default: 2
Min/Max: 1 to 255
Unit: x10 seconds
Decimal Default: 3
Min/Max: 1 to 255
Unit: none
Number of positive scans of A-channel tamper before triggering the tamper
alarm
Decimal Default: 2
Min/Max: 1 to 255
Unit: x10 seconds
Decimal Default: 3
Min/Max: 1 to 255
Unit: none
Number of positive scans of B-channel tamper before triggering the tamper
alarm
32-1 )
)
32-1
Page 76 of 99