Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
WMBUS Pulse - Guide utilisateur / User guide version V2.2.0
Once the nut and packing seal are installed, the strands of the meter cable can be connected to the screw terminals of the product.
Below is the identification of each terminal block:
Note: Up to 2 meters of the same type can be used in parallel.
Below is a description of the terminal blocks:
Meter with 2-wire output
In this configuration, it is necessary to deactivate the input TAMPER of A-channel (register 320 bit 3 = 0) and preferably deactivate B-channel
(register 320 bit 4=0) which is not no used.
GND
IMPULSE_2 / Black
TAMPER_2 / Yellow
GND / Brown
IMPULSE_1 / White
TAMPER_1 / Green
GROUND / GND
IMPULSE / BF
GND / Brown
IMPULSE_1 / White
FR
EN
Page
89
of 99
Publicité
Table des Matières
