Operation Of Audio System - Artweger Body+Soul Utilisation Et Entretien

Operation of Audio System

Audio system
On/Off
(when On the outer ring shines
blue)
Selection key for
• Radio
• Volume
• AUX: external devices (e.g. iPod, CD
player or USB stick with MP3 audio files)
VOL
• Press the ON/OFF key to turn on. The radio is turned on..
• Press the selection key once = VOL-LED lights up.
• Select desired volume with the +/– key. The LEDs show the current volume.
Automatic title selection (Shuffle)
Only available in AUX mode with connected USB stick.
• Only the AUX LED may light up.
• First press and hold the (-) button then in addition tap the (+) button.
• The active function is shown by way of successive lighting up of the LEDs 1-7.
• End the automatic title selection by repeating the action press and hold the (-) button then in addition tap the (+) button.
Setting and saving of radio stations
• The remote control has to be turned off for at least 10 secs. (No LED is lit!)
• First, press and hold the (+) button and also press the EIN button. (The colored light is automatically turned off)
• Radio LED lights up and the colored ring EIN blinks. Display of the current frequency as in table is active.
• Use the (-/+) button to begin the „search station" function (tap or press and hold)
• When you have found the required station let go of the (-/+) button and then make fine adjustment with the (-/+) button.
• To save the frequency, press the select button.
• The radio LED goes out and the colored ring EIN continues to blink
• Select the place to save the station with the (-/+) button.
• Confirm the save with the select button. The station is saved.
• The radio LED lights up again and the colored ring EIN continues to blink.
Display of current frequency as in table is active again.
• Select further station with the (-/+) buttons.
• If no button at all is pressed for approx. 15 sec. the save mode ends. The colored ring EIN goes out.
• It is possible to save 7 stations.
LED functions
• Radio mode
• Volume mode (Vol)
• AUX mode (external connection)
Reset Button
In the middle of the receptacle for the charger
is the Reset button. It is activated by pressing
it in with the aid of a blunt device (ca. 5mm in
diameter). All settings remain saved.
Function LEDs Station LEDs Frequency
87,50 - 90,00 MHz
90,50 - 93,00 MHz
93,50 - 96,00 MHz
96,50 - 99,00 MHz
99,50 - 102,00 MHz
102,50 - 105,00 MHz
105,50 - 108,00 MHz
16
LED for
• Radio station
• Volume
–/+ keys for
• Select radio station
• Adjust volume
• Select title when on AUX
(only for MP3 files on a USB stick)