Supplied Accessories; Changing Over Door Hinges - Electrolux IK257SZR Notice D'utilisation

Supplied accessories

Cover profile (covers the gap between
the top of the appliance and the recess)
Covers
Installation on the left at the top for right-hand
hinged door.
Installation on the right at the top for left-hand
hinged door.
Cover
Installation on the left at the bottom for right-hand
hinged door.
Installation on the right at the bottom for left-hand
hinged door.
Cover
Installation on the right at the top for right-hand
hinged door.
Installation on the left at the top for left-hand
hinged door.
Side cover for the door panel
retaining bracket
Top cover for the door panel retaining
bracket
2 pcs.
Pin to restrict the hinge opening angle
to 90°
2 pcs.
Angle bracket
To connect the appliance door and the
door panel.
2 pcs.
Cover for the angle brackets.
70
2 pcs.
Covers for openings in the interior container in the
freezer compartment area
These parts are required if the appliance door
hinges are changed over.
2 pcs.
Angle bracket
To connect the appliance door and the
door panel.
2 pcs.
Retaining plate
To connect the appliance door and the
door panel.
4 pcs.
12 pcs.
4 pcs.
Note
The accessory pack contains all necessary components for an
entire range of appliances. Parts may therefore be left over after
installation, depending on the appliance type.
8 pcs.
Ring spanner