Defrosting; Cleaning; Malfunctions; Shutting Your Appliance Down - Electrolux IK257SZR Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Defrosting

The refrigerator compartment defrosts automatically.
Freezer compartment
After a long period of operation, a layer of frost or ice can build up
on the walls of the freezer compartment. This increases energy
consumption.
• Pull out the plug or switch off the fuse!
• Wrap the frozen food in paper or blankets and store in a cool
place.
• Leave the appliance door and the freezer compartment door
open when defrosting.
• After a defrosting time of approx. 20 minutes, the layer of frost
or ice can be detached from the interior container by hand and
removed.
• After defrosting, mop up the remaining water and clean the
appliance.
CAUTION
Risk of damage to the refrigerant circuit and
flammability hazard due to leaking refrigerant.
Do not use any mechanical devices or other
artificial aids for defrosting other than those
recommended by the manufactur er.

Cleaning

Before cleaning, always switch off the appliance. Discon-
nect from the mains or switch off the fuse!
• Clean the inside and equipment with lukewarm water and a
little detergent. Do not use chemical solvents or any cleaning
agents containing sand or acid.
• Ensure that no cleaning water penetrates into the electrical
components or ventilation grille.
• Dry all parts well with a cloth.
• Do not damage or remove the type plate on the inside of the
appliance. It is very important for servicing purposes.
CAUTION
Risk of damage to the appliance components
and risk of injury due to hot steam.
Do not use steam cleaning equipment to clean
the appliance.

Malfunctions

• F0, F1, F2, F3, F4, F5, F6, F7, F8 or F9 appears in the display.
– The appliance has suffered a fault.
Contact the customer service department.
• When inserting the mains plug, the refrigeration unit does
not switch on, but a value is shown in the temperature
display.
– Demo mode is activated.
Contact the customer service department.
You may be able to rectify the following faults by checking
the possible causes yourself:
• Appliance does not function:
– Is the appliance switched on?
– Is the plug correctly fitted in the mains socket?
– Is the fuse intact?
• Loud running noise:
– Is the appliance set up firmly on the floor?
– Does the appliance cause nearby items of furniture or objects
to vibrate? Please note that noises caused by the refrigerant
circuit cannot be avoided.
• The temperature is not low enough:
– Is the temperature setting correct (see "Setting the tempera-
ture")?
– Does the separately installed thermometer show the correct
reading?
– Is the ventilation system working properly?
– Is the appliance set up too close to a heat source?
If none of the above causes apply
and you cannot rectify the fault
yourself, contact the nearest
customer service department
stating the type designation
PNC number
and appliance
2
number
as indicated on the
3
type plate.
The position of the type plate is shown in the section entitled
Description of the appliance.

Shutting your appliance down

If your appliance is to be shut down for any length of time, switch
it off and disconnect the plug or switch off or unscrew the fuse.
Clean the appliance and leave the door open in order to prevent
unpleasant smells.
The appliance complies with the relevant safety regulations and
EC Directives 2004/108/EC and 2006/95/EC.
,
1
GB
69

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ik257szl

Table des Matières