Worx Jawsaw WG307E Notice Originale page 21

PLUG REPLACEMEnT
(UK & IRELAnD OnLy)
If you need to replace the fitted plug then
follow the instructions below.
IMPOrTANT
The wires in the mains lead are colored in
accordance with the following code:
Blue = Neutral
Brown = Live
As the colors of the wires in the mains lead of
this appliance may not correspond with the
coloured markings identifying the terminals
in your plug, proceed as follows. The wire
which is coloured blue must be connected to
the terminal which is marked with N. The wire
which is coloured brown must be connected
to the terminal which is marked with L.
wArNINg! Never connect live or
neutral wires to the earth terminal of the
plug. Only fit an approved BS1363/A plug and
the correct rated fuse.
NOTE: If a moulded plug is fitted and has to
be removed take great care in disposing of the
plug and severed cable, it must be destroyed
to prevent engaging into a socket.
Limbing and Trimming Electric Chain Saw En
13
DECLARATIOn Of
COnfORMITy
We,
POSITEC Germany GmbH
Konrad-Adenauer-Ufer 37
50668 Köln
Declare that the product,
Limbing and Trimming
Description
Electric Chain Saw
wg307E wg308E (3 - designation
Type
of machinery, representative of chain saw)
Cutting wood
Function
Complies with the following Directives,
EC Machinery Directive
The notified body involved
Name: Intertek Testing & Certification
Limited(Notified body 0359)
EC Electromagnetic Compatibility Directive
2004/108/EC
RoHS Directive
Noise Emission in the Environment by
Equipment for Use Outdoors Directive
2000/14/EC amended by 2005/88/EC
–Conformity assessment procedure as per
Annex v
–Measured Sound Power Level
95.98 (A)
–Declared Guaranteed Sound Power Level
98dB (A)
Standards conform to:
EN 60745-1
EN 60745-2-13
EN ISO 3744
EN 55014-1
EN 55014-2
EN 61000-3-2
EN 61000-3-3
The person authorized to compile the technical
file,
Name russell Nicholson
Address Positec Power Tools (Europe)
Ltd, PO Box 152, Leeds, LS10 9DS, uk
2013/04/26
Leo Yue
POSITEC Quality Manager
2006/42/EC
2011/65/Eu
21