Worx Jawsaw WG307E Notice Originale page 12

may catch the saw chain and be whipped
toward you or pull you off balance.
8. Follow instructions for lubricating,
chain tensioning and changing
accessories. Improperly tensioned
or lubricated chain may either break or
increase the chance for kickback.
9. keep handles dry, clean, and free
from oil and grease. Greasy, oily
handles are slippery causing loss of
control.
10. Cut wood only. Do not use chain
saw for purposes not intended. For
example: do not use chain saw for
cutting plastic, masonry or non-wood
building materials. Use of the chain saw
for operations different than intended
could result in a hazardous situation.
11. Using of a residual current device with
a tripping current of 30 mA or less is
recommended.
12. Hold the power tool by insulated
gripping surfaces only, because the
saw chain may contact hidden wiring.
Saw chains contacting a "live" wire may
make exposed metal parts of the power
tool "live" and could give the operator an
electric shock.
12
Limbing and Trimming Electric Chain Saw En
SyMBOLS
Read the manual
Warning
Wear eye protection
Wear ear protection
Wear dust mask
Do not expose to rain
Remove plug from the mains
immediately if the cable is
damaged or cut.
Double insulation
This product has been marked
with a symbol relating to removing
electric and electronic waste. This
means that this product shall not
be discarded with household waste
but that it shall be returned to a
collection system which conforms
to the European Directive 2002/96/
CE. It will then be recycled or
dismantled in order to reduce the
impact on the environment. Electric
and electronic equipment can be
hazardous for the environment
and for human health since they
contain hazardous substances.