Table des Matières
Publicité
Technical details
Mowing width: 0,71 m
Wheel base:
Length:
1,35 m
Handlebars height:
Speed:
Weight:
50,5 kg
Tyre size:
Design:
robust sheet steel construction
Safety:
dead man's switch
Engine
stroke volume
Honda GS 160
160 ccm
Hand and arm vibration on cutterbar mower
according to VDI2057, page 2
1. Method of measurements
The measuring was carried out in mowing operation on sandy ground at a grass height of 20cm.
The vibrations were measured on the handlebars in 3 axis: x, - y, - z axis, see DIN 34675, part 8.
The effective value is measured over 60 seconds.
2. The measuring equipment used complies to DIN 45675
3. Operating conditions of the cutterbar mower
Warm, run-in engine under full load.
Beam width:
standard
Beam height:
approx. 4-5cm
Fuel tank:
approx. 50% full
Beam:
at middle setting
4. Measurement result: 60s effective value = 10,0 m/s
Noise level for the cutterbar mower
According to EG directive 84/538/EWG
1.Method of measurements
The measurement was carried out in standstill operation on sandy meadow.
1.1 Sound gage LPAm
1.2 Sound proficiency LWA
2. Used measurements according to DIN 45634
3.Operating conditions of the cutterbar mower:
Warm, run-in engine under 85% of full load
Beam width:
standard
Beam height:
approx 4 - 5 cm
Fuel tank:
approx 50 % full
0,46 m
0,82 m - 0,96 m
2,65 km/h
3.00-4 pneumatic,
rough terrain tread
output max.
3,7 kW/3600 rpm
=84,0 dBA
=98 dBA
effective output
3,5 kW/3400 rpm
2
61
Publicité
Table des Matières
