Technical Specifications; Symbols Used; Warranty - Kinetec Breva V01.0 Manuel D'utilisation

14.5.

Technical specifications

Product:
Lifespan of the machine:
Weight:
Splint dimensions:
Angular limits:
Speeds:
Foot sizes:
Maximum weight of the user:
Acoustic pressure:
Electricity:
Power supply:
Frequency:
Power consumption:
Class:
Protection class (device):
Protection class (carrying case):
Fuse:
Environment:
Storage/transport conditions:
Operating conditions:
14.6.

Symbols used

CAUTION
(consult the accompanying
documentation)
STOP (power off)
ON (power on)
Start movement
Stop movement
Program access
Right way up when box is stored
Contains electric and electronic
components; do not throw away with
household refuse.
Temperature Limit during storage or
transport
Class II device
IP20
See "Protection class" in section
IP01
"Technical specifications"
14.7.

Warranty

The device KINETEC
®
recognised as defective.
Kinetec SAS guarantees its continuous passive motion systems for 2 years against all defects of manufacture
from the date of purchase by the consumer.
Kinetec SAS is the only organization able to assess the application of the warranty to its systems.
The warranty will be considered null and void if the device has been used abnormally or under conditions of use
other than those indicated in the user's manual.
The warranty will also be considered null and void in the event of deterioration or an accident due to
negligence, inappropriate surveillance or inappropriate maintenance, or due to transformation of the
equipment or an attempt to repair the equipment.
Kinetec Breva™
warranty is strictly limited to the replacement, free of charge, or to factory repairs of part(s)
12 years
10.9 kg (24 pounds)
56cm (22in.) x 37cm (14.5in.) x 45cm (17in.)
see page 7
from 50 to 150° per minute
from 19cm (7.5in.) to 29cm (11.4in.)
135 kg (297 pounds)
<70dB
100-240V~
50-60 Hz
50 VA
Device of Type BF Class II or Type B Class I
IP 20 (protected against solid objects greater than 12.5mm,
but not protected against liquids)
IP 01 (non-protected against solid foreign objects,
protected against vertically falling water drops)
T 750mA 250V 6.3 x 32mm (KINETEC
Temperature:
Relative humidity:
Temperature:
Relative humidity:
Atmospheric pressure:
Speed
Timer
Force
Pause
Increase
Decrease
Extension limit
Fragile
Follow the instructions for use
TYPE BF device
(protection against electric shocks)
Humidity limit during storage or
transport
EN
order: 4610007434)
®
-25 to 70°C / -13 to 158°F.
up to 93% without condensation.
5 to 40°C / 41 to 104°F.
15% to 93% without condensation.
700 hPa to 1060 hPa.
Flexion limit
Warm up
Modulation
ByPass
Key for
Plantar Flexion/Dorsiflexion movement
Eversion/Inversion movement
~
Alternating current
Keep dry during storage or transport
Follow the instructions for use
TYPE B device
(protection against
electric shocks)
18/20