Program Mode: To Enter A Program - Kinetec Breva V01.0 Manuel D'utilisation

11.9.

PROGRAM MODE: To enter a program

Beginning
To switch off the unit
Press the 2 keys at the same time and switch
the unit ON
Then
To change the program if necessary
To choose the movement
To display the extension or flexion limit of the
movement
To change the limit if necessary
To confirm the new value, press another key
or wait more than 3 seconds
To record program 10
Then
OR
To cancel the program
To exit program mode, switch the unit OFF
and switch back ON.
Comments: The values in the display column are given as an example.
Kinetec Breva™
Keys to
press
BREVA V01.0
Program 1
Program 10
or
RIGHT PROG No.10
10 INV/EVE 10
LEFT PROG No.10
10 INV/EVE 10
Program 10
20 PL/DOR
Program 10
20 PL/DOR 0
Program 10
or
20 PL/DOR
Program 10
20 PL/DOR
or
Program 10
Speed:
Program 10
Force: _____
Program 10
Timer disable
Program 10
Pause PL
Program
Save:+
Program
Program 11
Program
Program 11
BREVA V01.0
EN
Display
KINETEC
Welcome text displayed for 3
seconds
The program number blinks.
EMPTY
The new program number blinks.
EMPTY
The display indicates the movement.
After selecting the movement press
the Warm Up key to confirm Warm
Up.
0
The value blinks.
0
The new value blinks.
20
1
While the value blinks press the (+) or
(-) key to change if necessary.
0s
10
clear:-
10
Program 10 has been recorded and
Saving
the display indicates the next
program so you can change another
program.
EMPTY
10
Program 10 has been removed and
CLEARING
the display indicates the next
program so you can change another
program.
EMPTY
KINETEC
To use the modified program see
page 10.
Remarks
9/20