Battery; Insert Batteries; Battery Voltage Check; System Settings - VOLTCRAFT RM-400 Mode D'emploi

9 Battery

9.1 Insert batteries

1. Remove the battery compartment cover by releasing the locking screw. Be care-
ful not to lose the screw.
2. Insert 4x AA batteries matching the polarities shown.
3. Replace the compartment cover.

9.2 Battery voltage check

Important:
– Replace the batteries before they are completely spent.
– Power shut off due to low batteries will result in data loss.
1. Press the
- Normal range is: 4.8 to 6.0 V.
- The replace battery symbol will show if the voltage is: < 4.8 V.
2. Press to exit battery voltage check.

10 System settings

Configure various settings through the setup menu before using the device.
1. Press and then ▲/ ▼to select a setting.
2. Press to confirm the selection or press
- Press ▲/ ▼to adjust values.
- Press
3. Press to save the setting and return to the main menu.
button to display the battery voltage.
to toggle through settings.
to exit the setup menu.
25