Data Transfer To Computer; Install Software On Computer; Bluetooth Data Transmission; Cleaning And Care - VOLTCRAFT RM-400 Mode D'emploi

12 Data transfer to computer

Use the bundled software to process and review the data.

12.1 Install software on computer

1. Insert the CD-ROM into your computer and double-click the software file to in-
stall it.
2. Follow the onscreen instructions to complete the installation process.

12.2 Bluetooth data transmission

Enable Bluetooth to transfer measured data to a computer in real-time using the
bundled software.
1. Press and then ▲/ ▼to select " ". Press
2. Press ▲/ ▼to select Bluetooth ON/OFF. Press
blink to indicate Bluetooth is transmitting data.
3. Open the software on the computer.
4. Select "BLE", select the radiation meter from the dropdown menu and then
click "CONNECT".
1

13 Cleaning and care

Important:
– Do not use aggressive cleaning agents, rubbing alcohol or other chemical
solutions. They damage the housing and can cause the product to malfunc-
tion.
– Do not immerse the product in water.
Clean the product with a dry, fibre-free cloth.
2 3
to confirm.
to exit settings. " " will
29