Technical Data; Approvals - Kübler MWE02 Instructions D'utilisation

2 Type / Order code
3 Product name
4 Supply voltage
5 Current consumption

3.5 Technical Data

Reference to the data sheet
All technical data, as well as the mechanical and electrical
characteristics, are specified in the data sheets of the corres-
ponding device variant, for special versions in the.corres-
ponding customer drawing of the product.
Observe the configuration
The performance characteristics and the mechanical design
of the product depend on the selected configuration (accord-
ing to order code).
Extracts of the main technical data are listed below. All other
characteristic values can be found in the corresponding
product data sheets.
20 - EN
7 Note Observe the oper-
ation manual
8 CE marking
9 Manufacturer and
address
NOTICE
NOTICE
3.5.1 Technical Data
Mechanical characteristics spring arm
Operating temperature
Protection level according to
EN 60529
Shock resistance according
to EN 60068-2-27
Vibration resistance accord-
ing to EN 60068-2-6
Maximum spring travel
Spring travel working area
The technical data of the encoder can be found in the relev-
ant operation manual/data sheet.

3.5.2 Approvals

The product meets the following criteria:
• Compliance with the European Directives:
– RoHS Directive 2011/65/EU
The declaration of conformity and all certificates relating to
the product can be found on the homepage.
www.kuebler.com/en/docu-finder
-20°C ... +70°C
[-4°F ... +158°F]
IP60
2
1000 m/s , 6 ms
55 ... 2000 Hz, 100 m/s²
16 mm [0.63"]
±5 mm [0.20"]
BA MWE02 - R60089.0009 - 01