Led Indicator; Receiver Fitting - Dogtra YS VIBE Manuel Du Propriétaire

LED INDICATOR

1. Vibration: The LED will light up when a vibration occurs
on the receiver.
2. Battery: The LED color indicates the battery life level.
Green = Full charge
Amber = Medium charge
Red = Needs charge
3. Standby: The LED will blink every 4 seconds when the
YS VIBE is turned on. The number of flashes will indicate
what level the receiver is set on.
LOW HPP LEVEL: LED blinks one time
MEDIUM HPP LEVEL: LED blinks two times
HIGH HPP LEVEL: LED blinks three times
28

RECEIVER FITTING

Proper Fit
The receiver should be fitted so that it has close contact
with your dog's neck to ensure proper vibration.
You should be able to fit a finger in between the product
and your dog's skin. The best location is on either side of
the dog's windpipe.
Improper Fit
A loose fit can allow the receiver to move around on the
dog's neck, which may rub against the skin and cause
irritation. If the receiver is too loose, the contact will not be
consistent and cause the corrections to be inconsistent.
29