Install Burner Grates - Bosch NGM5455UC Manuel D'installation

Checking Burner Cap Placement
• Check to make sure there is not a gap between the
burner cap and burner base. See Figure 10 "Burner
Cap Placement" on page 9 to see the correct and
incorrect placements of the burner cap.
Correct Burner Cap Placement

Install Burner Grates

Properly position and install each burner grate as shown in the following illustration.
24" 4 Burner
9001070914 Rev A
• You may gently try to move the burner cap from side to
side to check if it is properly placed. If properly placed,
the cap will click from side to side as the prongs hit the
groove ridge.
Incorrect Burner Cap Placement
9 WARNING
To prevent flare-ups, properly support pots, and
avoid spills, all grates must be properly positioned
on the cooktop whenever the cooktop is in use. Do
not use a grate if the rubber feet are missing or
damaged.
For replacement rubber feet: call the service number
listed inside the cover.
Figure 10: Burner Cap Placement
English 9