Checking Burner Cap Placement; Install Burner Grates - Bosch NGM5055UC Manuel D'installation

Checking Burner Cap Placement

• Check to make sure there is nota gap between the
burner cap and burner base. See Figure "Burner Cap
Placement" on page 9 to see the correct and incorrect
placements of the burner cap.
Correct Burner Cap Placement

Install Burner Grates

Properly position and install each burner grate as shown in the following illustrations. The center grate will seat with rubber
feet fitting to indentations in the cooktop surface. Check to be sure the feet match the indentations.
30" 4 Burner
9001079091 RevA
• You may gently try to move the burner cap from side to
side to check if it is properly placed. If properly placed,
the cap will click from side to side as the prongs hit the
groove ridge.
Incorrect Burner Cap Placement
30" 5 Burner
Figure 10: Burner Cap Placement
English 9