Install Burner Grates; Control Knobs - Bosch NGM5456UC Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Install Burner Grates

Properly position and install each burner grate as shown
in the illustration below.
24" 4 Burner
WARNING
To prevent flare-ups, properly support pots and
avoid spills, all grates must be properly positioned
on the cooktop whenever the cooktop is in use. Do
not use a grate if the rubber feet are missing or
damaged.
For replacement of rubber feet: Call Customer Support
at 1-800-944-2904.

Control Knobs

The cooktop has one control knob for each burner. Push
down and turn to the left to light and set the desired heat
setting.
WARNING
Failure to operate knobs properly may result in
personal injury and damage to the appliance.
The cooktop has standard burner controls and rubber
grommets.
The standard burner controls have an infinite number of
heat settings.
To operate: Select the appropriate control knob, push
down and turn counterclockwise to the desired flame
size. Turn off by turning the control knob clockwise to
OFF.
Control Knob Removal
To remove knob and/or grommet: With control knob in
the OFF position, gently lift knob up and off. Gently pull
the grommet from the sides and lift out.
WARNING
To avoid possible electric shock, do not reach
through control opening into rough-in box.
WARNING
Do not use the appliance without the knobs and
grommets in place.
To replace knob and/or grommet: Carefully insert the
grommet into the opening, ensuring that the maintop is
seated in the track around the entire perimeter of the
grommet. Replace control knob by placing indicator line
at the OFF position. Press down firmly.
9

Publicité

Chapitres

Table des Matières
loading

Table des Matières