Scheppach AB1900 Traduction Des Instructions D'origine page 26

In addition to the safety notes contained in the present operating instructions and the spe-
cial regulations of your country, the generally recognized technical rules for the operation
of machines must be observed.
We accept no liability for damage or accidents which arise due to non-observance of these
instructions and the safety information.
2. Device description (fig. 1-5)
1. Motor housing
2. ON- / OFF switch
3. Handle
4. Oil fill opening / sight glass
5. Additional handle
6. Tool holder
7. Point chisel
8. Locking bolt
9. Clamping screw
10. Locking switch
11. Tapping screw
3. Scope of delivery (fig. 6)
(1x) Demolition Hammer
(1x) Transport box (A)
(1x) oil bottle (B)
(1x) Point-chisel ø 30 L390 (C)
(1x) Flat-chisel ø 30 L390 (D)
(1x) Instruction manual
• Open the packaging and remove the device carefully.
• Remove the packaging material as well as the packaging and transport bracing (if avail-
able).
• Check that the delivery is complete.
• Check the device and accessory parts for transport damage. When complaints the deal-
er must be informed immediately. Subsequent complaints will not be accepted.
• If possible, store the packaging until the warranty period has expired.
• Read the operating instructions to make yourself familiar with the device prior to using it.
• Only use original parts for accessories as well as for wearing and spare parts. Spare
parts are available from your specialized dealer.
• Specify our part numbers as well as the type and year of construction of the device in
your orders.
26 | GB
www.scheppach.com