Hoover Expert Serie Guide D'utilisation page 10

Before you begin cleaning
Filling the dual tanks
WARNING:
To avoid the risk of personal injury
- Turn off, unplug, and allow steam cleaner to cool
before servicing or filling water or solution tank.
Do not use hot or boiling water to fill water tank.
1
Press the water tank release
buttons and pull the water tank
to remove.
7
IMPORTANT:
WATER TANK.
IMPORTANT:
solution on your flooring, turn solution dial to
OFF position. Always test on an inconspicuous
area of flooring first before using solution.
2
Pull the tab on the water tank
cap to open.
DO NOT ADD SOLUTION TO
If you don't want to use
3
Fill the water tank with water
only to fill line, replace the cap
and push firmly to close.
IMPORTANT:
DO NOT MIX HOOVER
STEAMPLUS CLEANING SOLUTION WITH ANY
OTHER CLEANING SOLUTION.
NOTE: When the tank is turned upright it may
allow a few drops to drip from cap. This is normal.
4
Slide the water tank back into
the machine until it clicks into
place.