Troubleshooting - Sonoro iElements Mode D'emploi

You can operate the iPod
The buttons correspond to the following iPod
Function
Open menu selection
Switch to the next higher menu level
Switch to the previous menu item (upwards)
Switch to the next menu item (downwards)
Select menu item
Start track
Play next track
Stop/continue playback
Stop playback

10. Troubleshooting

Faults can occur on all electrical devices. This does not necessarily mean that the device
is defective. Use the information in the following table to see if you can remedy the fault
yourself.
Fault
The device does
not switch on
No sound
Poor FM recep-
tion quality
24
® with the buttons on the device.
Possible cause
The mains adapter is not
correctly connected
Volume is set to minimum
Headphones are connected
Different mode is selected
The station signal is too
weak for the internal an-
tenna
The antenna selection
switch is set incorrectly
The FM antenna is not cor-
rectly positioned
® buttons:
iPod ®
Menu
Menu
Click wheel
Click wheel
Menu button
Start/pause
Forward/Fast
forward
Start/pause
Start/pause
Remedy
Connect the mains adapter correctly
(refer to section 2.4 "Power supply").
Increase the volume (refer to section
6.3 "Volume").
Remove the headphones from the
socket.
Select the correct mode (refer to
section 7.1 "Selecting the frequency
band").
Connect the external FM antenna
(refer to section 4.4 "Connecting the
antenna").
Set the antenna selection switch to the
correct position (refer to section 4.4
"Connecting the antenna").
Change the position of the FM antenna.
iElements
<<
<<
+
-
Menu button
Menu button
>>
Menu button