Activating The Battery; Connecting The Power Supply - Sonoro iElements Mode D'emploi

4.2 Activating the battery

Your iElements has an integrated battery for buffering the time in the event of a power failure.
The battery was isolated from the electrical circuit with red plastic film at the factory to
prolong its service life. Please remove this film before using your iElements for the first time.
DANGER!
Risk of injury if batteries are handled incorrectly!
Batteries must be handled with great care.
- Remove the batteries from the battery compartment as soon as they are
empty or if you do not intend to use the device for a prolonged period of time.
- Never dispose of any batteries in an open fire or expose them to high
temperatures.
- Never attempt to recharge normal batteries. Risk of explosion! Never attempt
to open or short-circuit the batteries.
- Liquid discharged from the batteries when they are used incorrectly can
cause skin irritation. If you come in contact with the liquid, wash it off with
generous amounts of water. If the liquid gets into your eyes, never rub your
eyes, but rinse them straight away with water for 10 minutes and contact a
doctor immediately.

4.3 Connecting the power supply

The device is supplied with power by means of the supplied mains adapter.
DANGER!
Risk of injury if handled incorrectly!
Risk of electric shock if the mains adapter is handled incorrectly.
WARNING!
Risk of damage to equipment in the event of incorrect voltage connection!
Connection ratings which exceed the maximum permissible values of the
device can cause irreparable damage.
- Only use the mains adapter supplied with the device.
– Only run the device if the voltage indicated on the mains adapter complies
with the rating of your mains socket.
1. Insert the plug of the mains adapter into the 12V 2A DC socket on the back of the
device.
2. Insert the mains plug into a mains socket.
11