Technical Data - Sonoro iElements Mode D'emploi

Fault
Poor AM recep-
tion quality
Alarm does not
work

11. Technical data

Display
Internal battery supply
Power consumption during
stand-by operation
Dimensions
Weight without mains
adapter
AUX-IN
Max. input voltage
Input impedance
MAINS ADAPTER
Model number
Input
Output
Dimensions
Weight
* for different national versions (e.g. A for USA, B for Europe, C for UK, E for Australia).
Subject to technical modifications!
Possible cause
AM antenna is not con-
nected
The AM antenna is not cor-
rectly positioned
Alarm is not switched on
Alarm volume is set to
minimum
Headphones are connected
8 digit VFD display
3 V lithium battery (IEC code: CR2032)
approx. 2 W
approx. 210 x 130 x 120 mm
approx. 1,600 g
250 mV eff.
22 kOhm
VA24*-120200
100-240 V~ AC, 0.7 A, 50-60 Hz
12 V DC, 2.0 A
approx. 81.5 x 49.5 x 48,5 mm
approx. 200 g
Remedy
Connect the AM antenna (refer to section
4.4 "Connecting the antenna").
Change the position of the
AM antenna.
Switch the alarm on (refer to section
8.2 "Alarm").
Increase the volume (refer to section
8.2 "Alarm").
Remove the headphones from the
socket.
25