Connecting Headphones - Sonoro iElements Mode D'emploi

4.5 Connecting headphones

Headphones with a 3.5 mm jack plug (not supplied) can be connected to the device.
DANGER!
Risk of injury if headphones are used incorrectly!
Incorrect use of headphones can cause severe accidents and damage your
health.
- When you are using the headphones, never set an excessively high volume.
- Even if your headphones are designed in such a way that you can still
perceive external noises, never set the volume to a level that stops you hearing
your surroundings.
1. Before you connect the headphones, adjust the volume to the minimum setting.
To this purpose press the VOL- button.
2. Insert the headphone jack plug into the headphone socket on the back of the device.
3. Slowly increase the volume. To this purpose press the Vol+ button.
The controls of the sonoro iElements enable fast and simple access to all functions.
13