Siemens SITRANS F Mode D'emploi page 38

Commissioning
3.5 Sensor Installation
①
②
③
Figure 3-10
3.5.3 Final Setup
1. After sensors are mounted scroll to [Install Complete].
2. Trigger <Right Arrow> sensor.
3. Trigger <Down Arrow> to select [Install].
36
Sensor Cables Connected to flow meter
To Downstream Sensor Channel 1
To Upstream Sensor Channel 1
Connecting Sensors to Flow Meter
FUH1010 IP65 NEMA 7 Interface Detector Quick Start
Operating Instructions, 06/2014, A5E02428148-AA