Siemens SITRANS F Mode D'emploi page 32
Masquer les pouces
Voir aussi pour SITRANS F:
- Instructions d'utilisation (179 pages) ,
- Instructions de service (91 pages) ,
- Manuel supplémentaire (28 pages)
Publicité
Les langues disponibles
Les langues disponibles
Commissioning
3.4 Programming the Transmitter
①
②
Figure 3-6
Sensor Selection
The following is a typical sensor installation procedure.
1. At the [Chan/Path Setup] menu, trigger the<Down Arrow> to select [install Sensor].
2. Trigger <Right Arrow> then <Down Arrow> to [Transducer Model].
3. Trigger <Right Arrow>.
4. Trigger <Down Arrow>and scroll to select the sensor model number on the sensor label
30
Hi Precision sensor model number
Sensor size
Hi Precision Sensor Label
FUH1010 IP65 NEMA 7 Interface Detector Quick Start
Operating Instructions, 06/2014, A5E02428148-AA
Publicité
