Siemens SITRANS F Mode D'emploi page 21

Table 3- 1
USA
EU
1. Within 10 seconds of power-up the main display will become active and an LCD display
3.2 RS-232 Connection
Figure 3-2
Communications and Programming via the RS-232 Interface (optional)
Note
Si-Ware
If you have the Si-Ware program CD (download program at: www.siemens.com/siware) and
want to use it instead of HyperTerminal, insert the Si-Ware CD or download the program into
your PC and follow the setup instructions.
FUH1010 IP65 NEMA 7 Interface Detector Quick Start
Operating Instructions, 06/2014, A5E02428148-AA
Color Codes
HOT
BK
BR
screen for use with the Magnetic Wand will appear as shown below.
①
LCD panel display showing initial screen with copyright notice.
Serial Port Program Menu Screen
NEU GND
WH GRN
BL Y/GRN
Commissioning
3.2 RS-232 Connection
19