Canon ImageRUNNER C1028i Guide De Démarrage page 47

‒
Do not bundle up or tie up the power cord in a knot, as this can result
in a fire or electrical shock.
‒
Insert the power plug completely into the AC power outlet. Failure to
do so can result in a fire or electrical shock.
‒
If excessive stress is applied to the connection part of the power cord,
it may damage the power cord or the wires inside the machine may
disconnect. This could result in a fire. Avoid the following situations:
•
Connecting and disconnecting the power connector frequently
•
Tripping over the power cord
•
The power cord is bent near the connection part, and continuous
stress is being applied to the power outlet or the connection part.
•
Applying a shock to the power connector
‒
Do not use power cords other than the one provided, as this can result
in a fire or electrical shock.
‒
As a general rule, do not use extension cords. Using an extension cord
may result in a fire or electrical shock.
‒
Remove the power plug from the AC power outlet and refrain from
using the machine while it thunders. Lightening can result in a fire,
electrical shock or malfunction.
‒
Do not use a power supply voltage other than that listed herein, as this
may result in a fire or electrical shock.
‒
Always grasp the power plug when unplugging the power plug. Do
not pull on the power cord, as this may expose the core wire of the
power cord or damage the cord insulation, causing electricity to leak,
resulting in a fire or electrical shock.
‒
Leave sufficient space around the power plug so that it can be
unplugged easily. If objects are placed around the power plug, you
may be unable to unplug it in an emergency.
Handling
‒
Do not disassemble or modify the machine. There are high-
temperature and high-voltage components inside the machine which
may result in a fire or electrical shock.
‒
Electrical equipment can be hazardous if not used properly. Do not
allow children to touch the power cord, cables, internal gears, or
electrical parts.
‒
If the machine makes an unusual noise or emits smoke, heat, or an
unusual smell, immediately turn off the power switches of the machine
and computer and disconnect the interface cable if it is connected.
Then, unplug the power plug from the AC power outlet and contact
your local authorized Canon dealer. Continued use can result in a fire
or electrical shock.
‒
Do not use flammable sprays near the machine. If flammable
substances come into contact with electrical parts inside the machine,
this may result in a fire or electrical shock.
‒
Always turn off the power switches of the machine and computer, and
then unplug the power plug and interface cables before moving the
machine. Failure to do so can damage the cables or cords, resulting in
a fire or electrical shock.
‒
Confirm that the power plug or power connecter is inserted
completely after moving the machine. Failure to do so can result in an
overheating and fire.
‒
Do not drop paper clips, staples, or other metal objects inside the
machine. Also, do not spill water, liquids, or other flammable
substances (alcohol, benzene, paint thinner, etc.) inside the machine. If
these items come into contact with a high-voltage area inside the
machine, this may result in a fire or electrical shock. If these items are
dropped or spilled inside the machine, immediately turn off the power
switches of the machine and computer and disconnect the interface
cable if it is connected. Then, unplug the power plug from the AC
power outlet and contact your local authorized Canon dealer.
‒
When plugging or unplugging a USB cable when the power plug is
plugged into an AC power outlet, do not touch the metal part of the
connector, as this can result in electrical shock.
‒
Do not place heavy objects on the machine. The object or the machine
may fall, resulting in personal injury.
‒
Turn off the power switch when the machine will not be used for a
long period of time, such as overnight. Turn off the machine and
unplug the power plug if the machine will not be used for an extended
period of time, such as for several days.
‒
Open or close covers and install or remove cassettes gently and
carefully. Be careful not to hurt your fingers.
‒
Keep your hands and clothing away from the roller in the output area.
Even if the machine is not printing, the roller may suddenly rotate and
catch your hands or clothing, resulting in personal injury.
‒
The output slot is hot during and immediately after printing. Do not
touch the area surrounding the output slot, as this may result in burns.
‒
Printed paper may be hot immediately after being output. Be careful
when removing the paper and aligning the removed paper, especially
after continuous printing. Failure to do so may result in burns.
‒
When performing copy with a thick book placed on the platen glass,
do not press the feeder forcefully. This may damage the platen glass
and cause personal injury.
‒
Be careful not to drop a heavy object, such as a dictionary, on the
platen glass. This may damage the platen glass and cause personal
injury.
‒
Close the feeder gently so as not to catch your hand. This may result in
personal injury.
‒
The laser beam can be harmful to human bodies. The laser beam is
confined in the laser scanner unit by a cover, so there is no danger of
the laser beam escaping during normal machine operation. Read the
following remarks and instructions for safety.
•
Never open covers other than those indicated in this manual.
•
Do not remove the caution label attached to the cover of the laser
scanner unit.
•
If the laser beam should escape and enter your eyes, exposure may
cause damage to your eyes.
‒
If you operate this machine in manners other than the control,
adjustment, and operating procedures prescribed in this manual, this
may result in hazardous radiation exposure.
‒
This machine is confirmed as the class 1 laser product in IEC60825-
1:2007.
Maintenance and Inspections
‒
When cleaning the machine, turn off the machine and computer, and
unplug the interface cables and power plug. Failure to do so can result
in a fire or electrical shock.
‒
Unplug the power plug from the AC power outlet periodically and
clean the area around the base of the power plug's metal pins and the
AC power outlet with a dry cloth to remove all dust and grime. In
damp, dusty, or smoky locations, dust can build up around the power
plug and become damp, which can cause a short circuit, resulting in a
fire.
‒
Clean the machine with a well wrung out cloth dampened with water
or mild detergent diluted with water. Do not use alcohol, benzene,
paint thinner, or other flammable substances. If flammable substances
come into contact with electrical parts inside the machine, this may
result in a fire or electrical shock.
‒
Some areas inside the machine are subject to high-voltage. When
removing jammed paper or when inspecting inside of the machine, be
careful not to allow necklaces, bracelets, or other metal objects to
touch the inside of the machine, as this can result in burns or electrical
shock.
45