Canon ImageRUNNER C1028i Guide De Démarrage page 39

12
Installation of the printer driver is
completed and the installation of
the fax driver will begin.
If the optional Super G3 FAX Board
is not installed on the
imageRUNNER C1028i, proceed to
step 24.
13
14
15
–
If you are using a shared printer
in the Print Server (Point and
Print) environment, it is
necessary to install the Canon
Driver Information Assist Service
in the server computer to set up
the printer coniguration
automatically or use the
Department ID Management.
–
If the Canon Driver Information
Assist Service is already installed
on your computer, this screen is
not displayed.
–
If you are using an operating
system equipped with Windows
Firewall, the following message
box may appear. If you want to
use Canon Driver Information
Assist Service, click [Yes]. If you
select [No], you cannot use
Canon Driver Information Assist
Service.
16
Select [Canon iR C1028/1030
(FAX)].
17
3 Set up Computers and Software
18
Select the USB port you want to
use from the [Port] drop-down list.
If you want to add a port, click
[Add Port] and then select the USB
port that you want to add.
19
20
21
37