Canon ImageRUNNER C1028i Guide De Démarrage page 17

The receive mode determines how the machine responds to incoming faxes and voice calls. Select the mode
that most suits your needs from the chart below. For more information about the receive modes, see "About
the Receive Modes, " on p. 14.
–
The remote reception function is useful when the receive mode is set to <Manual RX> and your machine is connected to an
external telephone. You can receive faxes by picking up the external telephone and pressing a two-digit remote reception ID (the
default setting is 25). For details, see "Fax, " in the e-Manual.
–
Your telephone with built-in answering machine or answering machine must be connected directly to the machine to use
<Answer Mode>. Make sure that the auto answering function of the telephone with built-in answering machine or answering
machine is activated.
–
The external telephone must be connected to the machine to use <Fax/Tel Auto Switch> or <Manual RX>.
–
Incoming calls or outgoing calls may not work properly, depending on the type of the external telephone connected to the
machine.
–
By default, <Auto RX> is selected in <Reception Mode Selection>. If an external telephone is connected to the machine and
receives a fax or voice call, the external telephone rings. You can answer voice calls while the external telephone is ringing.
–
To disable the incoming ring, press
Settings> → <RX Settings> → <Incoming Ring>, then select <Of>.
–
Voice mail is not supported with <Answer Mode>.
1
Press (Main Menu).
2
Press the right Any key to select <Additional
Func.>.
(Main Menu) to select <Additional Func.> → <Communications Settings> → <Fax
3
4
2 Set Up the Machine
Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select
<Communications Settings>, then press [OK].
Use [ ▼ ], [ ▲ ] or (Scroll Wheel) to select
<Fax Settings>, then press [OK].
15