Operations During A Call; Call Data Management; Preset Dial - Sony XAV-64BT Mode D'emploi

Operations during a call

The following display appears during a call.
ATT
On the Line.
Name
0123456789
Handsfree OFF
To adjust the talker's voice volume
Turn the volume control dial during a call.
The level of the talker's voice volume will be
stored into memory, independently from the
regular volume level.
To send DTMF (Dual Tone Multiple
Frequency) tones
Touch "Open Keypad," then the required number
keys.
To transfer the current call to the
cellular phone
Touch "Handsfree OFF."
To transfer back to the handsfree call, touch
"Handsfree ON."
Note
Depending on the cellular phone, connection may be
cut off when call transfer is attempted.
To adjust the volume for the other
party
1
Touch "BT Menu."
2
Touch v/V to display "MIC Gain."
3
Touch "Low/Middle/High" repeatedly
to select the desired setting.
To return to the previous display, touch "Back."
To end a call
Touch .
36
BT Menu Top
Open Keypad
10:59

Call data management

Preset dial

You can store contacts in the phonebook or call
history into the preset dials.
To store from the phonebook
1
Press (TOP), then touch "BT Phone"
in the top menu.
The Bluetooth Phone display appears.
2
Touch "Call Menu," then "Phonebook
Browsing."
The phonebook appears.
3
Select the contact to store in the
preset dial.
1 In the initial list, touch the initial of the
contact.
2 In the name list, touch the name of the
contact.
3 In the number list, touch the phone
number.
The contact confirmation display appears.
4
Touch "Preset Memory," then the
desired preset number ("P1" to "P6").
The contact is stored to the selected preset
number.
To store from the call history
1
Press (TOP), then touch "BT Phone"
in the top menu.
The Bluetooth Phone display appears.
2
Touch "Call Menu," then "Recent Call
Browsing."
The call history list appears.
To scroll the list, touch v/V.
3
Touch the desired item in the list.
The contact confirmation display appears.
4
Touch "Preset Memory," then the
desired preset number ("P1" to "P6").
The contact is stored to the selected preset
number.
To change the registration of the
preset dial
Follow the procedure above and overwrite a
registered preset dial.