Receiving Calls; Operations During A Call - Sony XAV-701HD Mode D'emploi

• Do not use the voice dial function on the cellular
phone while it is connected to this unit.
• Noises such as the engine running may interfere
with sound recognition. In order to improve
recognition, operate under conditions where noise is
minimized.
• Voice dial may not work depending on the
recognition specification of the cellular phone. For
details, visit the support site on the back cover.
To adjust the talker's voice volume
Press (VOLUME) +/– while making a call.
The level of the talker's voice volume will be
stored into memory, independently from the
regular volume level.

Receiving calls

With the unit connected to the cellular phone,
you can receive a call in any status (except for
MirrorLink™ mode).
To answer the call
Touch .
To adjust the ringtone volume
Press (VOLUME) +/– while receiving a call.
The level of ringtone volume will be stored into
memory, independently from the regular volume
level.
To reject a call
Touch .
Note
The ringtone and talker's voice are output only from
the front speakers.
Tips
• You can set to answer a call automatically (page 42).
• You can set to use the ringtone of the cellular phone
or this unit (page 42).

Operations during a call

To adjust the talker's voice volume
Press (VOLUME) +/– during a call.
The level of the talker's voice volume will be
stored into memory, independently from the
regular volume level.
To send DTMF (Dual Tone Multiple
Frequency) tones
Touch , then the required number keys.
To transfer the current call to the
cellular phone
Touch
To transfer back to the handsfree call, touch
40
again.
.
Note
Depending on the cellular phone, connection may be
cut off when call transfer is attempted.
To adjust the volume for the other
party
1
Touch , then "MIC Gain."
2
Touch "Low," "Middle," or "High" to
adjust the level.
3
Touch repeatedly to return to the
previous displays.
To end a call
Touch .