Controlling Applications On Your Smartphone - Mirrorlink; Controlling Applications On Your Iphone - Telenav ® Gps App; Enjoying Different Sources In Front And Rear; Zone × Zone - Sony XAV-701HD Mode D'emploi

Controlling applications on your
smartphone — MirrorLink™
This function duplicates the smartphone's display
on the in-car display, so you can control applications
on your smartphone with the bigger screen.
Only a smartphone compatible with the
MirrorLink™ function can be used.
1
Connect your smartphone and the unit
via USB cable.
2
Press (HOME), then touch
"MirrorLink™."
The smartphone's display appears on the in-
car display.
Touch and control applications in the same
way as you do on your smartphone.
Note
For your safety, when the parking brake is not
engaged, some smartphone screen content may not
be displayed on AVC.
Controlling applications on your
iPhone — Telenav
Telenav's navigation on your iPhone makes
finding and getting to your destination faster,
easier, and more convenient than ever before.
Now you can use Telenav
Sony ® receiver. Simply connect your Telenav
GPS to the car and see directions on your
receiver screen while hearing them over the car
speakers.
1
Connect your iPhone to the USB port.
2
Launch the Telenav application on the
iPhone.
3
Press (HOME), then touch "Telenav."
The display of the Telenav application
appears on the display of the unit, and the
touch panel operation enables you to control
the application on your iPhone.
Note
The Telenav function is only available on iPhone 4S
and iPhone 4, and downloading the Telenav app to
your iPhone is required.
Enjoying different sources in
front and rear — Zone × Zone
You can simultaneously enjoy different sources
in the front and rear of the car.
Selectable sources for this unit (front) and the
rear monitor (rear) are indicated below.
®
GPS App
® GPS with your
®
Front: Any source.
Rear: Disc inserted in this unit.
1
Press (HOME) on the main unit.
2
Touch "ZONE × ZONE" to activate
Zone × Zone.
To operate the source in the front, use the
touch panel and buttons on the main unit.
To operate the source in the rear, use the
remote commander.
Tip
You can also activate/deactivate Zone × Zone by
pressing (Z x Z) on the remote commander.
To deactivate Zone × Zone
Touch "ZONE × ZONE" again in the HOME
menu.
Notes
• Once (SOURCE/OFF) on the main unit or remote
commander is pressed, Zone × Zone is deactivated.
• While Zone × Zone is activated, the following buttons
on the remote commander become inactive:
(SRC), (MODE), (ATT), (VOL) +/–, (CLEAR),
number buttons.
• While Zone × Zone is activated, you can only
operate rear DVD playback by the remote
commander.
• While Zone × Zone is activated, the following are
deactivated.
– EQ7 (page 45)
– Balance/Fader/Subwoofer (page 53)
– Intelligent Time Alignment (page 46)
– CSO (page 47)
– HPF, LPF (page 54)
– Rear Bass Enhancer (page 47)
Changing the color of buttons
—Dynamic Color Illuminator
Dynamic Color Illuminator allows you to change
the color of the buttons on the main unit to match
the car's interior.
You can select from 12 preset colors, customized
color and 5 preset patterns.
x Preset colors
"Red," "Amber," "Medium Amber," "Yellow,"
"White," "Light Green," "Green," "Light Blue,"
"Sky Blue," "Blue," "Purple," "Pink."
x Preset patterns
"Rainbow," "Ocean," "Sunset," "Forest,"
"Random."
1
Press (HOME), then touch "Settings."
2
Touch , and move the scrollbar up
and down, then touch "Key
Illumination."
35