Sony XAV-64BT Mode D'emploi page 47

Item
Rear/Sub Out
Switches the audio output
between the rear speakers and
subwoofer.
RBE (Rear Bass Enhancer)
(page 41)
Uses rear speakers like
subwoofers.
Crossover Filter
Selects the cut-off frequency
of the front/rear speakers
(HPF) and subwoofer (LPF).
4.1ch Speaker Level
(page 41)
Option Purpose
Rear To output audio signals to
the rear speakers
(amplifier).
Sub (z) To output audio signals to
the subwoofer.
OFF (z), To select the mode.
RBE1, RBE2,
RBE3
LPF: 50 Hz, To select the cut-off
60 Hz, 80 Hz,
frequency. (Available only
100 Hz (z),
when "Subwoofer" is set to
120 Hz
"ON.")
HPF: OFF (z) To not cut out the
frequencies.
HPF: 50 Hz, To select the cut-off
60 Hz, 80 Hz,
frequency.
100 Hz, 120 Hz
Subwoofer To select the subwoofer
Phase:
phase. (Available only
Normal (z),
when "Subwoofer" is set to
Reverse
"ON.")
– –
Unit status
No source
selected
During reception/
playback
During reception/
playback
No source
selected
47